Elliott Wave Fibonacci targets: wave 3 extensions and wave C
By ImpulseSeal · Published · Updated
Elliott Wave Fibonacci targets are the retracement and extension levels commonly used to mark where a wave may complete. This lesson focuses on two of the most-used markers: the wave 3 extension and the wave C target. In standard Elliott Wave Theory these relationships are guidelines, not rules. A missed level does not break a count; a broken impulse-wave rule does.
Lesson 1 in the ImpulseTA app is free; the rest of the Elliott Wave lesson library is on Pro and Elite.
This article is for education only and is not financial advice. A wave count can be wrong, a marked level can be left unfilled, and nothing here is a promise of profit or future results.
Guidelines for marking a count, not forecasts that must fill
The Elliott Wave course for beginners covers the three hard rules of a standard impulse: wave 2 never retraces beyond the start of wave 1, wave 3 is never the shortest of waves 1, 3, and 5, and wave 4 does not overlap wave 1. Those rules decide whether an impulse label can stand. Fibonacci targets sit on top of that structure. They help you organize a count; they do not require price to stop at a particular ratio.
If a wave 3 stalls short of a popular 161.8% extension, the impulse can still be valid so long as wave 3 is not the shortest of waves 1, 3, and 5. If wave 2 holds the origin of wave 1 but misses a 61.8% retracement, the label can still stand.
Retracements and extensions
A retracement measures how much a corrective wave gives back of the motive wave it is correcting: wave 2 of wave 1, wave 4 of wave 3, or wave B of wave A. An extension measures a motive wave as a multiple of an earlier wave of the same degree. The most common example is a wave 3 extension: the length of wave 3 compared with the length of wave 1. Wave 5 can also be related to wave 1, or to the net length of waves 1 through 3. Wave C is often measured against wave A.
For an advancing wave 3, the length is the distance from the end of wave 2 to the end of wave 3, set next to the length of wave 1.
Common impulse-wave relationships
Wave 2. Wave 2 often retraces 50% or 61.8% of wave 1, and sometimes about 38.2%. Deep wave 2 retracements are compatible with an impulse if they hold the origin of wave 1. A break of that origin is not a Fibonacci miss. It is a broken rule.
Wave 3 extension. Wave 3 is the wave most often extended. A typical wave 3 extension is 161.8% of the length of wave 1. Some third waves travel farther, including 261.8% of wave 1. Wave 3 may also equal wave 1, but then one of the other two motive waves is usually the extended wave, and wave 3 still must not be the shortest of waves 1, 3, and 5. When wave 3 is extended — the most common case — the guideline of equality says waves 1 and 5 often tend toward similar lengths. That is a tendency used to mark a possible wave 5 area, not a requirement.
Wave 4. Wave 4 often retraces 23.6% or 38.2% of wave 3 — typically shallower than wave 2, which fits alternation: a sharp wave 2 is often followed by a sideways wave 4, and the reverse. In a standard impulse, wave 4 must also stay out of the price territory of wave 1. A Fibonacci cluster inside wave 1's range is not a reason to allow overlap.
Wave 5. Wave 5 often equals wave 1, or relates to the net length of waves 1 through 3 by 61.8%. If wave 5 is the extended wave, it can be longer — sometimes 161.8% of that net length, or 161.8% of wave 1. Mark those areas as possible completion zones, then check the finished structure against the three rules.
Wave C targets
In a zigzag (5-3-5). Wave C often equals wave A, or measures 161.8% of wave A, taken from the end of wave B. A shorter relationship, 61.8% of wave A, also appears when wave C is relatively brief. Wave B typically retraces only a portion of wave A and does not reach the start of A.
In a flat (3-3-5). In a regular flat, wave C often ends near the length of wave A, close to the end of A. In an expanded flat, wave B ends beyond the start of A, and wave C typically ends beyond the end of A. A common wave C target there is 161.8% of wave A. Those are still guidelines. The identifying structure is the 3-3-5 shape and the position of B and C relative to A, not whether a ratio is reached exactly.
Use a wave C target the same way you use a wave 3 extension: as a place to watch for a five-wave move to complete, and as a reason to re-examine the count if price blows through the area and the structure no longer fits.
A short worked example
Imagine a five-wave advance that already obeys the impulse rules. Before wave 3 finished, a 161.8% extension of wave 1 was marked as a common area where that third wave might end. If the advance slowed near that area and then rolled into a shallower wave 4, the mark helped locate a typical finishing zone. If wave 3 had run beyond that level and still looked like five waves, the impulse would not have been discarded just because the popular extension was exceeded.
If that impulse is then followed by a zigzag — a five-wave drop, a three-wave bounce that does not retrace all of A, and a second five-wave decline — a common wave C target is equality with wave A, with 161.8% of A as a farther reference. If the second decline cannot complete five waves, or if the first leg was only three waves and the bounce exceeded the start of A, the correction may be a flat, and the wave C target should be measured against that structure. No specific prices are used here because the test is the relationship between waves.
Common mistakes
- Treating a Fibonacci level as a rule. A missed 161.8% wave 3 extension does not invalidate an impulse. A wave 3 that is shorter than both wave 1 and wave 5 does.
- Keeping an invalid count because a target is still “open.” If wave 4 has overlapped wave 1 in a standard impulse, the label is wrong even if a wave 5 extension has not been reached.
- Measuring from the wrong origin. Wave 3's length is compared with wave 1's length, not measured from the start of wave 1 as if wave 2 had not occurred.
- Ignoring structure when a level is hit. A wave C target is useful only if C is the right shape — typically five waves in a zigzag or a flat.
- Stacking every ratio as if each must be visited. Mark the relationships that fit the count you are testing, rather than covering the chart in unused levels.
FAQ
What are Elliott Wave Fibonacci targets? They are common retracement and extension levels used to mark where a wave may end, such as a 161.8% wave 3 extension or a wave C target equal to wave A. They are guidelines, not rules.
What is a typical wave 3 extension? Wave 3 often extends to 161.8% of the length of wave 1, and sometimes farther, such as 261.8%. It may equal wave 1, but it must not be the shortest of waves 1, 3, and 5.
How is a wave C target usually marked? In a zigzag, wave C often equals wave A, or measures 161.8% of wave A, from the end of wave B. In a regular flat, C often ends near the length of A. In an expanded flat, C often measures 161.8% of A and typically travels beyond the end of A.
Do Fibonacci targets have to be reached for a count to be valid? No. A target is a reference point, not a forecast that must be filled. Only a break of the impulse-wave rules invalidates an impulse label.
Where should I start if I am still learning the impulse rules? Start with the Elliott Wave course for beginners, then return here to mark targets on a count you can already test.
Mark the count with ImpulseTA
ImpulseTA by ImpulseSeal offers paid Elliott Wave lessons on the Pro ($14.99/mo) and Elite ($79.99/mo) plans, and chart review on Elite. Plans start at $6.99/mo. See pricing and more explainers on /learn.
This article is free to read. Lesson 1 in the app is free; the rest of the Elliott Wave lesson library is on Pro and Elite.
ImpulseTA may hold, buy, or sell positions in securities discussed. Price targets and projections are Elliott Wave scenarios for education, not predictions or recommendations.
This material is for education only. It is not financial advice, a recommendation to buy or sell any security, or a claim that any wave count, target, lesson, or plan will produce a profit.